Differences

This shows you the differences between two versions of the page.

--- games:factorio:minimize_train_traffic [2024/11/20 23:17] – clay
+++ games:factorio:minimize_train_traffic [2024/11/20 23:43] (current) – clay
@@ Line 4: / Line 4: @@
 ## Basics
-- Set up as many parking lot train stations as you have trains then add this interrupt.
+- Set up as many "parking lot" train stations as you have trains then add the interrupt below.
 - Turn off as many stations as you can using conditions. (Both pick up and drop off stations, turn them off if possible!)
-- When the station is disabled(or full), trains go to parking lot.
+- If a station is full or disabled the train will go to the parking lot.
-- If a station's train limit is set to 2 but you have 3+ trains that want to go to that station, the 3rd+ trains will go to the parking lot. The train will wait 30sec in the parking lot before checking to see if the station is open. If the drop-off station is enable and not full the train will go to it. If the drop-off station is disabled or full the train will stay at the parking lot station and wait 30sec before checking again.
+  - In the parking lot, trains will wait 30sec before checking to see if the station is open.
+  - If the station is enable (and not full) the train will go to it.
+  - If the station is disabled (or full) the train will stay at the parking lot station (and wait 30sec before checking again).
 ## The Interrupt