This is an old revision of the document!

The Interrupt

Set up as many parking lot train stops as you have trains then add this interrupt.

Drop-off Stations

• Turn off as many stations as you can using conditions. (Both pick up and drop off stations, turn them off if possible!)
• When the station is disabled(or full), trains go to parking lot.

  Multiple items

  Note: Circuit connection on train stops is "enable if"

Single Item

Trains

Always put the pickup before the drop-off

Multiple Items at a Drop-off Station Train Settings

• Can't make condition "Empty cargo Inventory" because another item might be needed
• 

Single Items at a Drop-off Station Train Settings

• Set all drop-off trains to stay until "Empty cargo Inventory"

• 

• If a station's train limit is set to 2 but you have 3+ trains that want to go to that stop, the 3rd+ trains will go to the parking lot. They will wait 30sec in the parking lot before checking to see if the stop is open.

Get Gass Interrupt