This is an old revision of the document!

<markdown>

## The Interrupt Set up as many parking lot train stops as you have trains then add this interrupt.


## Drop-off Stations - Turn off as many stations as you can using conditions. (Both pick up and drop off stations, turn them off if possible!) - When the station is disabled(or full), trains go to parking lot. ### Multiple items  Note: Circuit connection on train stops is “enable if”


### Single Item 

## Trains Always put the pickup before the drop-off

### Multiple Items at a Drop-off Station Train Settings - Can't make condition “Empty cargo Inventory” because another item might be needed - 

### Single Items at a Drop-off Station Train Settings - Set all drop-off trains to stay until “Empty cargo Inventory” - 

- If a station's train limit is set to 2 but you have 3+ trains that want to go to that stop, the 3rd+ trains will go to the parking lot. They will wait 30sec in the parking lot before checking to see if the stop is open.

—

## Get Gass Interrupt 

</markdown