Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
| games:factorio:minimize_train_traffic [2024/11/20 23:35] – clay | games:factorio:minimize_train_traffic [2024/11/20 23:43] (current) – clay | ||
|---|---|---|---|
| Line 4: | Line 4: | ||
| ## Basics | ## Basics | ||
| - | - Set up as many parking lot train stations as you have trains then add this interrupt. | + | - Set up as many "parking lot" |
| - Turn off as many stations as you can using conditions. (Both pick up and drop off stations, turn them off if possible!) | - Turn off as many stations as you can using conditions. (Both pick up and drop off stations, turn them off if possible!) | ||
| - If a station is full or disabled the train will go to the parking lot. | - If a station is full or disabled the train will go to the parking lot. | ||
| - | - In the parking lot trains will wait 30sec before checking to see if the station is open. | + | - In the parking lot, trains will wait 30sec before checking to see if the station is open. |
| - If the station is enable (and not full) the train will go to it. | - If the station is enable (and not full) the train will go to it. | ||
| - If the station is disabled (or full) the train will stay at the parking lot station (and wait 30sec before checking again). | - If the station is disabled (or full) the train will stay at the parking lot station (and wait 30sec before checking again). | ||